K-Type (NiCr-Ni) Thermocouple Cable 2x0.22 mm² is a thermocouple cable used to transmit the thermoelectric signal generated by K-Type thermocouple sensors to the temperature measuring instrument, controller, indicator, data logger, PLC thermocouple input or control panel.
Supplied in 100-meter rolls, the product offers a bulk-procurement advantage to businesses that regularly use cable for production, maintenance, control-panel assembly, and field wiring. It can be cut to the required lengths for different sensor and instrument connections.
The two-core cable structure has fiberglass insulation layers and a steel braid on the outside. While the fiberglass structure is preferred in fixed connections where temperature effects are present, the steel braid helps protect the cable body against friction and surface mechanical effects.
This product is not a power supply cable. It should be used in K-Type thermocouple measurement circuits. For correct connection, the sensor type, cable type, thermocouple connector and device input must be compatible with K-Type. Positive and negative polarity must be maintained throughout the connection.
The two cores of the cable are separated from each other by fiberglass-based insulation layers. The outer fiberglass braid helps hold the cores together and protect the cable body.
Fiberglass insulation is a preferred structure in thermocouple cables used in machine, oven, process and panel connections where temperature effects are present. The exact operating temperature of the cable should not be determined solely by looking at the insulation material; Conductor, outer braid, terminal, connector and connection points should be evaluated together.
The outer steel braid creates an auxiliary layer of mechanical protection around the cable. It helps protect the cable against friction and light mechanical effects on routes with machine body, panel passage and surface contact.
The main function of the steel braid is mechanical protection. If it is planned to be used as an electrical shield, the electrical continuity of the braid, coverage structure, connection method and manufacturer's technical data should also be checked.
The product is offered in green and white core colors. This color structure complies with the IEC color scheme used for K-Type thermocouple connections. When making connections, color alone should not be relied upon. Positive-negative signs on the sensor, cable and device terminals should also be checked.
The fact that the core colors are compatible with the relevant color scheme does not in itself mean that the product is certified according to a certain standard. For official standard compliance, the manufacturer's technical document should be used as the basis.
Using a thermocouple cable compatible with the sensor type helps reduce measurement deviations that may result from improper metal combinations in the measurement line.
100-meter roll format provides regular cable supply for businesses that produce sensors at regular intervals, carry out maintenance-repair work, or prepare a large number of panel and machine connections.
Fiberglass insulation is preferred in industrial thermocouple connections where temperature effects are present. Due to its braided surface structure, it must be protected from sharp bends, crushing and operations that may damage the fiber structure during assembly.
The steel braid does not transform the cable into a completely enclosed or leak-proof outer sheath. In applications where moisture, liquid, oil, chemicals or dense dust are present, the product's suitability for environmental conditions should be evaluated separately.
The cable should not be subjected to excessive pulling force, crushing, sharp metal edges or repeated bending. Steel braid helps with mechanical protection, but does not provide unlimited protection against heavy mechanical loads.
When determining the exact operating conditions of the cable, ambient temperature, mechanical movement, vibration, humidity, cabling route, connection terminals and connectors to be used should be evaluated together.
In the K-Type thermocouple connection, the positive and negative conductors must be connected to the corresponding terminals on the sensor and measuring instrument. Sensor polarity, cable cores and device terminal markings must be checked before connection.
Reverse polarity may cause the measurement value to change in the wrong direction or the device to display incorrect values as the temperature rises. The same polarity pattern must be maintained from the sensor to the measuring instrument.
Thermocouple cable, terminal and thermocouple connector compatible with K-Type must be used in the K-Type measurement circuit. Using standard copper cable or cable of a different thermocouple type may create inappropriate metal connections in the measurement line.
While preparing the cable end, care should be taken to ensure that the steel braid wires do not come into contact with the thermoelement conductors or device terminals. The shield must be properly removed and the connection area must be isolated in accordance with the application.
The thermocouple cable should be carried on a route as separate as possible from motor supply lines, inverter outputs, contactor lines and high-current power cables.
The product is supplied as a single 100-meter roll. Cable can be cut from the roll to the lengths required by the application. The sensor connection, route inside the control panel, bends, and terminal-connection allowance must be considered when cutting.
When unrolling, care should be taken to ensure that the cable is not knotted, crushed or bent to a smaller diameter than necessary. The unused section should be stored in a dry, clean area away from the risk of mechanical damage.
The most used cables in production and maintenance processes 100-meter roll We have collected them on a single page. Thermocouple (J/K), PT100 and compensating cables You can order by choosing the number of cores, cross-section and insulation structure that suits your needs, with a special price advantage for bulk purchases.
This product group focuses on promotional 100-meter roll cables. After the order, the stock and supply status of the product is checked and a packaging and shipment plan is created. Before bulk purchasing, it must be ensured that the sensor type, number of cores, cross-section, insulation and cable construction are suitable for your application.
When choosing a K-Type thermocouple cable, sensor type, thermoelement compatibility, number of cores, nominal cross-section, insulation structure, mechanical protection need, connection distance and input structure of the measuring instrument should be evaluated together.
This product is prepared for K-Type NiCr-Ni thermocouple measurement circuits. For J, T, N, E, R, S or different thermocouple types, a thermocouple cable compatible with the relevant sensor type must be used.
Fiberglass insulation can be preferred in fixed connections where temperature effects are present, and steel braid can be preferred in routes where auxiliary mechanical protection is required. The suitability of the cable in humid, liquid or chemical environments must be further verified through the manufacturer's technical data.
This product should be used in K-Type NiCr-Ni thermocouple sensor and measurement circuits.
This statement indicates that the cable consists of two cores and each core has a nominal conductor cross-section of 0.22 mm².
The product is supplied as a single 100-meter roll.
The cable can be cut into different lengths from the roll according to the needs of the application. Cutting and tip preparation should be done with appropriate equipment.
Green-white core colors comply with the IEC color scheme used for K-Type thermocouple. Positive and negative terminal markings must be checked before connection.
Fiberglass insulation is preferred in industrial thermocouple connections where temperature effects are present. The exact temperature limits of the cable must be evaluated according to the manufacturer's technical documentation.
The steel braid forms an auxiliary layer of mechanical protection around the cable trunk. It helps protect the cable against friction and surface mechanical effects.
The main function of the steel braid is mechanical protection. In order to be used as an electrical shield, the electrical continuity of the braid, coverage structure, connection method and manufacturer's technical data must be checked.
No. This product is used to transmit a thermocouple measurement signal. It must not be used to power motors, heating elements, or other electrical loads.
It is suitable for businesses that produce regular sensors, carry out maintenance-repair work, prepare control panels or need thermocouple cables of different lengths.
The manufacturer's technical data sheet should be used as the basis for the exact operating temperature of the cable, conductor construction, thermoelement tolerance, outer dimension, steel braid material, minimum bending radius and environmental resistance limits.
During product selection and installation, thermocouple type, measuring instrument input, cable cross-section, terminal structure, ambient temperature, humidity, mechanical loads and cabling route should be evaluated together.
EN
Türkçe
